# The hacker's guide to uncertainty estimates

It started with a tweet:

New years resolution: every plot I make during 2018 will contain uncertainty estimates

— Erik Bernhardsson (@fulhack) January 7, 2018

Why? Because I’ve been sitting in 100,000,000 meetings where people endlessly debate whether the monthly number of widgets is going up or down, or whether widget method X is more productive than widget method Y. For almost any graph, quantifying the uncertainty seems useful, so I started trying. A few months later:

I'm four months into this year and I gotta tell you – the rabbit hole of estimating uncertainty is DEEP https://t.co/wvSlsYskrt

— Erik Bernhardsson (@fulhack) May 12, 2018

I never studied statistics and learned it kind of “backwards” through machine learning, so I consider myself more as a hacker who picked up statistics along the way. Earlier this year I had some basic knowledge of bootstrapping and confidence intervals, but along the way I had to pick up a whole arsenal of tricks going all the way to Monte Carlo methods and inverse Hessians. It seemed useful to share some of the methods I’ve used the most, so I wrote this post!

*Note: this post features some math which might not render properly outside the canonical location of the post.*

# Let’s get started

I don’t believe in learning things without a concrete example, so let’s generate some data. We’re going to generate a fake time series where the dates range from 2017-07-01 to 2018-07-31. Let’s say the observations are all the weights of an elephant.

```
def generate_time_series(k=200, m=1000, sigma=100, n=50,
start_date=datetime.date(2017, 7, 1)):
xs = numpy.linspace(0, 1, n, endpoint=False)
ys = [k*x + m + random.gauss(0, sigma) for x in xs]
ts = [start_date + datetime.timedelta(x)*365 for x in xs]
x_scale = numpy.linspace(-1, 2, 500) # for plotting
t_scale = [start_date + datetime.timedelta(x)*365 for x in x_scale]
return xs, ys, ts, x_scale, t_scale
xs, ys, ts, x_scale, t_scale = generate_time_series()
```

Before we get started with anything, we need graphics. Let’s plot to see what’s going on!

```
pyplot.scatter(ts, ys, alpha=0.5, s=100)
pyplot.xlabel('Date')
pyplot.ylabel('Weight of elephant (kg)')
```

First of all, let’s not fit any fancy models. We’re just going to break it up into a few buckets and compute the mean within each bucket. But let’s first pause and talk about uncertainty.

# Distribution of the data vs uncertainty

This makes me sometimes feel dumb but I keep confusing what “uncertainty” means and I think it’s important to be hyper clear because we’re going to do all of them. There’s multiple different things we can estimate the distribution for:

- The data itself. Given a certain time frame , what’s the distribution of the elephant’s weight during that time interval?
- The uncertainty of some parameter, like the parameter in a linear relationship .
*Or*the uncertainty of some estimator, like the*mean*of a number of observations. - The uncertainty of predicted quantities. So if we predict that for a date (possibly in the future), the elephant is going to weight kg, we want to know the uncertainty of the quantity .

Hope that makes sense! Let’s start with the most basic model – just break things up in buckets. I recommend the excellent Seaborn package if we just want to get some basic idea of distributions and uncertainty estimates. Seaborn usually operates on dataframes so we’ll need to convert:

```
d = pandas.DataFrame({'x': xs, 't': ts, 'Weight (kg)': ys})
d['Month'] = d['t'].apply(lambda t: t.strftime('%Y-%m'))
seaborn.boxplot(data=d, x='Month', y='Weight (kg)')
```

These last charts show the *distribution* of the dataset. Let’s now try to figure out the uncertainty of a very common estimator: the *mean*!

## Computing the uncertainty of the mean – normal distributions

Under some mild assumptions (I’m going to get back to this in a sec and scrutinize it), we can compute the confidence intervals *of the mean estimator* as:

Where is the mean and is the standard deviation, a.k.a. the square root of the variance. I don’t think this formula is super important to remember, but I think it’s somewhat useful to remember that the *size of the confidence interval is inversely related to the square root of the number of samples.* For instance, this is useful when you’re running an A/B test – if you want to detect a 1% difference then you need something on the order of samples. (This is a rule of thumb, don’t use it for your medical device software).

By the way – what’s the 1.96 number from? It’s directly related to the size of the uncertainty estimate. With you will cover about 95% of the probability distribution.

```
def plot_confidence_interval(observations_by_group):
groups = list(sorted(observations_by_group.keys()))
lo_bound = []
hi_bound = []
for group in groups:
series = observations_by_group[group]
mu, std, n = numpy.mean(series), numpy.std(series), len(series)
lo_bound.append(mu - 1.96*std*n**-0.5)
hi_bound.append(mu + 1.96*std*n**-0.5)
pyplot.fill_between(groups, lo_bound, hi_bound, alpha=0.2,
label='Confidence interval (normal)')
pyplot.scatter(ts, ys, alpha=0.5, s=100)
observations_by_month = {}
for month, y in zip(d['Month'], d['Weight (kg)']):
observations_by_month.setdefault(month, []).append(y)
plot_confidence_interval(observations_by_month)
pyplot.ylabel('Weight of elephant (kg)')
pyplot.legend()
```

Note that this shows the uncertainty of the *mean* and that this is not the same thing as the *distribution of the data* itself. That’s why you see far fewer than 95% of the points within the red shaded area. If we added more and more points, the red shaded area would get more and more narrow, whereas the blue dots would still have about the same range. However the true mean should in theory be within the red shaded area 95% of the time.

I mentioned earlier that the formula for confidence interval only applies under some mild assumptions. What are those? It’s the assumption of *normality*. For a large number of observations, this is nothing to worry about, and this is due to the central limit theorem.

# Confidence intervals when all outcomes are 0 or 1

Let’s look at a type of dataset that I often work on: conversions. For the sake of the argument, let’s say we’re running an A/B test that has some impact, and that we’re trying to understand the impact on conversion rate *by state*. Conversion is always 0 or 1. The code to generate this data set isn’t super important, so don’t pay too much attention to this:

```
STATES = ['CA', 'NY', 'FL', 'TX', 'PA', 'IL', 'OH']
GROUPS = ['test', 'control']
def generate_binary_categorical(states=STATES, groups=GROUPS, k=400,
zs=[0, 0.2], z_std=0.1, b=-3, b_std=1):
# Don't pay too much attention to this code. The main thing happens in
# numpy.random.binomial, which is where we draw the "k out of n" outcomes.
output = {}
e_obs_per_state = numpy.random.exponential(k, size=len(states))
state_biases = numpy.random.normal(b, b_std, size=len(states))
for group, z in zip(groups, zs):
noise = numpy.random.normal(z, z_std, size=len(states))
ps = 1 / (1 + numpy.exp(-(state_biases + noise)))
ns = numpy.random.poisson(e_obs_per_state)
ks = numpy.random.binomial(ns, ps)
output[group] = (ns, ks)
return output
```

For each state and each “group” (test and control) we generated users, out of which have converted. Let’s plot the conversion rate per state to see what’s going on!

```
data = generate_binary_categorical()
for group, (ns, ks) in data.items():
pyplot.scatter(STATES, ks/ns, label=group, alpha=0.7, s=400)
pyplot.ylabel('Conversion rate')
pyplot.legend()
```

How do we compute confidence intervals for these numbers? We could of course use the method I just covered further up where we compute the mean and the standard deviations. But in this case there’s a trick we can use!

Since all outcomes are 0 or 1, and drawn with the same (unknown) probability, we know that the number of ones and zeros follows a binomial distribution. This means that the confidence interval of a “ out of ” scenario is a Beta distribution.

I’ve personally benefitted from memorizing the formula for the confidence interval and think I probably use it more than the previous (Normal based) one. In particular all you need to remember is

```
n, k = 100, 3
scipy.stats.beta.ppf([0.025, 0.975], k, n-k)
```

```
array([0.00629335, 0.07107612])
```

This will compute a 95% confidence interval if you plug in values for and . In this case we see that if we have 100 website visitors and 3 of them purchased the product, then range is 0.6%-7.1%. Let’s try this for our dataset:

```
for group, (ns, ks) in data.items():
lo = scipy.stats.beta.ppf(0.025, ks, ns-ks)
hi = scipy.stats.beta.ppf(0.975, ks, ns-ks)
mean = ks/ns
pyplot.errorbar(STATES, y=mean, yerr=[mean-lo, hi-mean],
label=group, alpha=0.7, linewidth=0, elinewidth=50)
pyplot.ylabel('Conversion rate')
pyplot.legend()
```

Nice! 👌

## Bootstrapping

Another approach that can be useful is bootstrapping. It allows you do compute the same statistics without memorizing any formulas. The idea is to compute the mean, but do it for *bootstraps*, where each bootstrap is a random sample (with replacement) from our observations. For every bootstrap, we compute a mean, and then we take the mean in the 97.5th and the 2.5th percentile as the confidence interval:

```
lo_bound = []
hi_bound = []
months = sorted(observations_by_month.keys())
for month in months:
series = observations_by_month[month]
bootstrapped_means = []
for i in range(1000):
# sample with replacement
bootstrap = [random.choice(series) for _ in series]
bootstrapped_means.append(numpy.mean(bootstrap))
lo_bound.append(numpy.percentile(bootstrapped_means, 2.5))
hi_bound.append(numpy.percentile(bootstrapped_means, 97.5))
pyplot.scatter(ts, ys, alpha=0.5, s=100)
pyplot.fill_between(months, lo_bound, hi_bound, alpha=0.2,
label='Confidence interval')
pyplot.ylabel('Weight of elephant (kg)')
pyplot.legend()
```

Miraculously, this charts look very similar to the one before! Just kidding – that was sort of expected :)

Bootstrapping is nice because it lets you dodge any questions about what probability distribution the data is generated from. It’s basically plug and play, and works on almost everything, though it can be a bit slow.

☠ Be aware though that there’s a *danger zone* of bootstrapping. My understanding is that bootstrapping will *converge* towards the correct estimates as the number of samples goes to infinity, but if you’re working with small samples, you can get really wonky results. I generally never trust bootstrapping for anything less than say 50 samples, and you probably shouldn’t do that either.

As a side note, Seaborn’s `barplot`

actually plots confidence intervals using bootstrapping:

```
seaborn.barplot(data=d, x='Month', y='Weight (kg)')
```

Again, Seaborn is great for exploratory analysis, and some of its charts can do basic statistics.

# Regression

Let’s crank it up a notch. We’re going to fit a straight line to this cloud of points.

There’s some smart ways you can implement linear regression so that it’s extremely fast, but we’re not going to use those methods because they don’t generalize very well.

I’m going to do it in what I think of as the most general possible way. We’re going to define a *model* (in this case a straight line), a *loss function* (squared deviations from this straight line) and then optimize it using a general-purpose solver (scipy.optimize.minimize).

```
xs, ys, ts, x_scale, t_scale = generate_time_series()
def model(xs, k, m):
return k * xs + m
def l2_loss(tup, xs, ys):
k, m = tup
delta = model(xs, k, m) - ys
return numpy.dot(delta, delta)
k_hat, m_hat = scipy.optimize.minimize(l2_loss, (0, 0), args=(xs, ys)).x
pyplot.scatter(ts, ys, alpha=0.5, s=100)
pyplot.plot(t_scale, model(x_scale, k_hat, m_hat), color='red',
linewidth=5, alpha=0.5)
pyplot.ylabel('Weight of elephant (kg)')
```

## Linear regression with uncertainty, using maximum likelihood

We just fit and but there’s no uncertainty estimates here. There’s several things we could estimate uncertainties for, but let’s start with the *uncertainty of the predicted values*.

We can do that by fitting a normal distribution around the line *at the same time* as we’re fitting and . I’m going to do this using Maximum Likelihood. If you’re not familiar with this method, don’t be scared! If there’s *any* method in statistics that I’ve found as easily accessible (it’s basic probability theory) and useful, it’s this method.

In fact, minimizing squared loss (which we just did, in the previous snippet) is actually a special case of maximum likelihood! Minimizing the squared loss is the same thing as *maximizing the logarithm of the probability of all the data.* This is usually called the “log likelihood”.

So we already have an expression to minimize the squared loss. If we make the variance an unknown variable we can fit that at the same time! The quantity we’re going to try to minimize now turns into

Where are the predicted values by our model. Let’s try to fit that!

```
import scipy.optimize
def neg_log_likelihood(tup, xs, ys):
# Since sigma > 0, we use use log(sigma) as the parameter instead.
# That way we have an unconstrained problem.
k, m, log_sigma = tup
sigma = numpy.exp(log_sigma)
delta = model(xs, k, m) - ys
return len(xs)/2*numpy.log(2*numpy.pi*sigma**2) + \
numpy.dot(delta, delta) / (2*sigma**2)
k_hat, m_hat, log_sigma_hat = scipy.optimize.minimize(
neg_log_likelihood, (0, 0, 0), args=(xs, ys)
).x
sigma_hat = numpy.exp(log_sigma_hat)
pyplot.scatter(ts, ys, alpha=0.5, s=100)
pyplot.plot(t_scale, model(x_scale, k_hat, m_hat),
color='green', linewidth=5)
pyplot.fill_between(
t_scale,
model(x_scale, k_hat, m_hat) - 1.96*sigma_hat,
model(x_scale, k_hat, m_hat) + 1.96*sigma_hat,
color='red', alpha=0.3)
pyplot.legend()
pyplot.ylabel('Weight of elephant (kg)')
```

The uncertainty estimate here isn’t actually 💯 because it doesn’t take into account the uncertainty of , , and in itself. It’s a decent approximation, but to get it right we need to do those things at the same time. So let’s do it.

# Bootstrapping, rebooted

So let’s take it to the next level and try to estimate the uncertainty estimate of and *and* ! I think this will show how bootstrapping is basically cookie cutter — you can plug it into almost anything in order to estimate uncertainties.

For every bootstrap estimate, I’m going to draw a line. We can also take all those lines and compute a confidence interval:

```
pyplot.scatter(ts, ys, alpha=0.5, s=100)
xys = list(zip(xs, ys))
curves = []
for i in range(100):
# sample with replacement
bootstrap = [random.choice(xys) for _ in xys]
xs_bootstrap = numpy.array([x for x, y in bootstrap])
ys_bootstrap = numpy.array([y for x, y in bootstrap])
k_hat, m_hat = scipy.optimize.minimize(
l2_loss, (0, 0), args=(xs_bootstrap, ys_bootstrap)
).x
curves.append(model(x_scale, k_hat, m_hat))
# Plot individual lines
for curve in curves:
pyplot.plot(t_scale, curve, alpha=0.1, linewidth=3, color='green')
# Plot 95% confidence interval
lo, hi = numpy.percentile(curves, (2.5, 97.5), axis=0)
pyplot.fill_between(t_scale, lo, hi, color='red', alpha=0.5)
pyplot.ylabel('Weight of elephant (kg)')
```

Whoa, what’s going on here? This uncertainty is *very* different from the earlier plot. This seems confusing until you realize that they show two very different things:

- The first plot finds
*one*solution of and and shows the uncertainty of the*predictions.*So, if you’re asked what’s the range of the elephant’s weight in the next month, you can get it from the chart. - The second plot finds
*many*solutions of and , and shows the uncertainty of . So this answers a different question – what’s the trend of the elephant’s weight over time and what’s the uncertainty*of the trend*.

It turns out we can combine the two approaches and make it even more complicated by fitting drawing bootstrap samples and fitting , , and at the same time. Then for each of those estimates, we can predict new values . Let’s do it 😎.

```
pyplot.scatter(ts, ys, alpha=0.5, s=100)
xys = list(zip(xs, ys))
curves = []
for i in range(4000):
# sample with replacement
bootstrap = [random.choice(xys) for _ in xys]
xs_bootstrap = numpy.array([x for x, y in bootstrap])
ys_bootstrap = numpy.array([y for x, y in bootstrap])
k_hat, m_hat, log_sigma_hat = scipy.optimize.minimize(
neg_log_likelihood, (0, 0, 0), args=(xs_bootstrap, ys_bootstrap)
).x
curves.append(
model(x_scale, k_hat, m_hat) +
# Note what's going on here: we're _adding_ the random term
# to the predictions!
numpy.exp(log_sigma_hat) * numpy.random.normal(size=x_scale.shape)
)
# Plot 95% confidence interval
lo, hi = numpy.percentile(curves, (2.5, 97.5), axis=0)
pyplot.fill_between(t_scale, lo, hi, color='red', alpha=0.5)
pyplot.ylabel('Weight of elephant (kg)')
```

Nice! It’s getting serious now 😅 – you can see a hyperbolic shape if you look closely!

The trick here is that for every bootstrap estimates of we also need to draw random predictions. As you can see in the code, we’re actually adding random normal variables to the predicted values for . That’s also why the shape end up a big squiggly.

Unfortunately bootstrapping turns out to be fairly slow for this problem – for each of the bootstraps, we need to fit a model. Let’s look at another option:

# Markov chain Monte Carlo methods

It’s going to get a bit wilder now. I’m going to switch to some Bayesian methods, where we estimate , , and by drawing samples. It’s similar to bootstrapping, but MCMC has far better theoretical underpinnings (we are sampling from a “posterior distribution” using Bayes rule), and it’s often orders of magnitude faster.

For this, we’re going to use a library called emcee which I’ve found pretty easy to use. All it needs is a log-likelihood function, which as it turns out we just defined earlier! We just need to take the *negative* of it.

```
import emcee
xs, ys, ts, x_scale, t_scale = generate_time_series()
def log_likelihood(tup, xs, ys):
return -neg_log_likelihood(tup, xs, ys)
ndim, nwalkers = 3, 10
p0 = [numpy.random.rand(ndim) for i in range(nwalkers)]
sampler = emcee.EnsembleSampler(nwalkers, ndim, log_likelihood,
args=[xs, ys])
sampler.run_mcmc(p0, 10000)
```

Let’s plot the sampled values for and !

```
# Grab the last 10 from each walker
samples = sampler.chain[:, -10:, :].reshape((-1, ndim))
pyplot.scatter(ts, ys, alpha=0.5, s=100)
for k, m, log_sigma in samples:
pyplot.plot(t_scale, model(x_scale, k, m), alpha=0.1,
linewidth=3, color='green')
pyplot.ylabel('Weigh of elephant (kg)')
```

There’s a bit more stuff that goes into these methods – the sampling is a bit finicky and requires a bit of handholding to get to work well. I don’t want to get into all the specifics, and I’m a layman myself. But it can often be several orders of magnitude faster than booststrapping and it also handles situation with less data much better.

We end up with samples from the posterior distribution of . We can look at the probability distribution of these unknowns:

```
# Grab slightly more samples this time
samples = sampler.chain[:, -500:, :].reshape((-1, ndim))
k_samples, m_samples, log_sigma_samples = samples.T
seaborn.distplot(k_samples, label='k')
seaborn.distplot(m_samples, label='m')
seaborn.distplot(numpy.exp(log_sigma_samples), label='sigma')
pyplot.legend()
```

You can see that these distribution sort of center around , , and which is how we constructed them in the first place. That’s somewhat reassuring!

Finally, we can plot the full uncertainty of predictions using the same methodology as for boostraps:

```
pyplot.scatter(ts, ys, alpha=0.5, s=100)
samples = sampler.chain[:, -4000:, :].reshape((-1, ndim))
curves = []
for k, m, log_sigma in samples:
curves.append(
model(x_scale, k, m) +
numpy.exp(log_sigma) * numpy.random.normal(size=x_scale.shape)
)
# Plot 95% confidence interval
lo, hi = numpy.percentile(curves, (2.5, 97.5), axis=0)
pyplot.fill_between(t_scale, lo, hi, color='red', alpha=0.5)
pyplot.ylabel('Weight of elephant (kg)')
```

These Bayesian methods don’t end here. In particular there’s several libraries that work with these kind of problems. It turns out that if you express the problem in a more structured way (not just a negative log-likelihood function), you can make the sampling scale to large problems (as in, thousands of unknown parameters). For Python there’s PyMC3 and PyStan, as well as the slightly more experimental (?) Edward and Pyro.

# Wrapping up

I’ve taken you a bit down the rabbit hole – but it goes much further. In fact, forcing myself to estimate uncertainties for anything I do has been a great forcing function to learn a ton about statistics that I’ve been deferring for too long and I recommend it to anyone who is interested.

Making decisions based on data is hard! But if we were a bit more disciplined about quantifying the uncertainty, we might make better decisions. It’s not easy right now to do this, but I *really* hope we’ll see a popularization of these methods using more accessible tools.

Thanks to Jim Savage for some feedback on an earlier draft! All the code is available as a notebook on Github.

# Finally

I’m looking for data engineers to join my team at Better! Feel free to reach out at erik at better dot com, or also DM on Twitter, or apply directly if you want to. You can read a bit more about the role in a previous blog post.